Have you own the Samsung Galaxy device with yourself. Yes now
many Android users are having the popular Samsung Galaxy devices. There is a
tool that must keep with the all Galaxy users. Yes, Samsung Odin tool is most
useful tool for every galaxy users. This tool can be used to perform upgrade,
downgrade, root and perform many official and non-official task within your
device.
The Samsung Galaxy A3 device allow to is officially update to
the Android Marshmallow. But due to any reason if you haven't the access then
you can use the Samsung Odin tool to manually update your device. Android
Marshmallow is consists with more features including Doze mode, Always on
display, now on tap. So, you can enjoy these things within your Galaxy A3, to
that get the help of Odin tool. The process is very easy. And you can use the
latest Samsung Odin v.3.12.5 for this process.
Facts to Consider
OK if due to any reason you haven't the access to upgrade
your Samsung Galaxy A3 device to the Android 6.0 Marshmallow then you can try
it with manually. So, here you want to use the Samsung Odin tool. Remember this
is a Window based tool, Therefore you need to have Windows PC to start the
process. At the same time make sure it has the correct USB drivers. If not
download and install them. Further you must Stay be on Stock firmware and stock
recovery. Within this process You may lose your valuable data so have a backup
with yourself. Ensure to maintain sufficient battery level within your device.
And you want to follow the steps
correctly, if not it will happen to brick your device. And there is no one to
have the responsibility so be carefully.
Upgrade guide
Yes, if you have a correct idea about the above facts, then
we can start the upgrading process of your device.
- OK, you want to Download the Latest Samsung Odin tool to your PC and extract it
- Now download the suitable firmware file to your Samsung Galaxy A3 device model and unzip it
- Now enable the USB Debugging Function on your device Go to Settings> About device> Built number and tap 7 times on it. Now "Developer option" will enable go to it and you can find the Debugging function
- Now run the Odin file on your PC
- Then boot your device in to "Download mode" by press and hold the "Power + Home + Volume Down" buttons
- Now connect your device to the PC via USB cable and wait until the tool to detect your device
- After detect you device you can see the "Added" message in Odin surface
- Now select the downloaded firmware file to AP/PDA tab in the Odin surface
- Now make sure the "Auto Reboot" and "F.Reset Time" only. (Don't check Re-partition)
- OK, now if all the things are correct and you have the enough confidence then click "start" button to start the flashing process
- No it will take few time for the process, so wait and see. After the process you can see the "Pass" message
- Yes, now you have successfully flash the process now your device will automatically reboot. now you can disconnect your device from the PC
Note: If the latest version of Samsung Odin tool is not
comply with your device then you can try for another later version.
No comments:
Post a Comment